ماژول تایمر 18 برنامه با رله

مدل: (DRM01)
وضعیت: ناموجود
برند: Chinese class 1

 ماژول تایمر 18 برنامه با رله

 

(Timer module with reley DRM01 ( frm01

12V FRM01 Multifunctional Relay Module Loop Delay Timer Switch Self-Locking

Description:

Users can display the buttons and select the following nine kinds of functions in one, you can set and save 9 kinds of function parameters, you can also view the current function parameters, time parameter sets the minimum one second adjustable accuracy of better than 0.1 seconds.

Feature:

Function 1: Timing Pick: After power relay delay time T1, T1 in 0 seconds adjustable between -270 hours, give CH1 connector is a high pulse signal(high duration is greater than or equal 20ms, hereinafter the same), repeat the above functions

Function 2: Timed disconnect: On power relay, time relay off delay time T1, T1 in 0 seconds adjustable between -270 hours, giving a high level pulse signal CH1 connector, repeat the above functions

Function 3: Loop Timing Mode 1: After power on, to not pull the relay, the delay time T1 after arrival relay; pull the relay off time T2 after arrival, and then repeat the above state, the delay time T1 and T2 in 0 seconds adjustable between -270 hours, giving a high level pulse signal CH1 connector, you can resume these functions

Function 4: Loop Timing Mode 2: After power, the relay immediately pull, delay time T1 after arrival relay off; off time T2 arrives relay, and then repeat the above state, the delay time T1 and T2 in 0 seconds - adjustable between 270 hours and give CH1 connector is a high pulse signal, these functions can be re-started

Function 5: Latching relay mode: CH1 connector to relay a high level pulse signal, the relay, to give a high level pulse signal relay disconnected

Function 6: Trigger relay mode: CH1 connector to a high signal relay, relay, high disappeared, relay disconnected

Function 7: Finite loop timing mode 1: Function 3, based on the number of cycles increased functionality, then T1 and T2 in 0 seconds -9999 seconds adjustable between 1-9999 times in between cycles adjustable

Function 8: Finite loop timing mode 2: In function 4, based on the number of cycles increased functionality, then T1 and T2 in 0 seconds -9999 seconds adjustable between 1-9999 times in between cycles adjustable

Function 9: Customized Mode: Reserved

Two module interface:

Module control side: there are 3-wire interface, all interfaces are terminal, user-friendly
DC+: DC power supply positive( 12V )
DC-: DC power cathode
CH1: Hold Input Detection Interface
Relay outputs: A 3-wire interface, all interfaces are terminals
NO1: normally open relay interface, the relay becomes vacant before, pull shorting after the COM1
COM1: Relay Common Interface
NC1: normally closed relay interface relay shorted before and COM1, pull vacant post
Module: 5V / 12V / 24V (please choose one you need)
 
 
 
در حال بارگذاری...
لطفا منتظر بمانید
مرورگر شما بسیار قدیمی است!
جهت مشاهده این وب سایت به صورت صحیح، بروزرسانی مرورگرتان ضروری خواهد بود. بروزرسانی مرورگر
×